Note – this is NOT an endorsement for this case, the zippered track broke very quickly. Been using it in half broken state for 4 years because I’m too lazy to find a better alternative.
MomsSpagetee
I just deal with the big tangled mess cuz wrapping them up each time is tedious.
Few_Valuable3999
I roll them up and just put them in a ziplock bag
PasF1981
I use the core of a roll of toilet paper
20071991
Crown royal bag
jdelaossa
Don’t you have the wrapping / case?
Top-Distribution733
Store them??? What’s that? Mine are forever plugged in
rgbkng
I have an old cup i place them in. So far it had worked for me
Brilliant-Arm-3648
call thermoworks & ask them to send you their catalogue. you’ll find what you’re looking for (& so many ither goodies) in it. i got several of the silicone ones with magnatized backs that you can attach to the side of the frig or anywhere a magnet will hold. ‘bon appetit’ & ‘happy cooking’
Lateapexer
Binder clip each Then a heavy duty zipper pouch
collector-x
Wrap around fingers then twist tie it.
flashdman
I put the whole works of it in a 14 cup Rubbermaid container…
BillWeld
Coat hook on porch wall. Keeps four probes fairly well.
Kermitreditall
I have one, but I never got to a point to asked for help. If it ever makes it on to my todo list then I would 1. Wrap the cord around hand, hold 2. Velcro tape band around cord If it ever moves up the list that’s what I do.
30 Comments
Following lol. Mine look like a draw full metal spaghetti
I keep the plastic thing it comes with. I just wrap it how it was packaged.
Here is one option.
[https://www.amazon.com/PATIKIL-Plastic-Tubing-Polycarbonate-21mmx25mm/dp/B0BMYPZ2WM](https://www.amazon.com/PATIKIL-Plastic-Tubing-Polycarbonate-21mmx25mm/dp/B0BMYPZ2WM)
Mine came with a round plastic knob, the rough part of the probe fits into the center and the wire wraps around the outside.
Probe spools from Thermoworks are awesome.
[Probe spools ](https://www.thermoworks.com/silicone-probe-spool/)
Twist tie.
Thermoworks sells a circle thing to wrap them around
I just throw both probes and controller into a heavy duty ziplock. Keeps it contained and easy to find.
I just hang mine over a hook. I store everything in my shed though.
Rip an appropriately sized flap off a cardboard box, insert probe securely, wrap cord around said cardboard flap, secure in clear gallon ziplock.
I coil carefully around my hand and then store in thermoworks case: https://www.thermoworks.com/tx-1010x-sc/
Note – this is NOT an endorsement for this case, the zippered track broke very quickly. Been using it in half broken state for 4 years because I’m too lazy to find a better alternative.
I just deal with the big tangled mess cuz wrapping them up each time is tedious.
I roll them up and just put them in a ziplock bag
I use the core of a roll of toilet paper
Crown royal bag
Don’t you have the wrapping / case?
Store them??? What’s that? Mine are forever plugged in
I have an old cup i place them in. So far it had worked for me
call thermoworks & ask them to send you their catalogue. you’ll find what you’re looking for (& so many ither goodies) in it. i got several of the silicone ones with magnatized backs that you can attach to the side of the frig or anywhere a magnet will hold. ‘bon appetit’ & ‘happy cooking’
Binder clip each Then a heavy duty zipper pouch
Wrap around fingers then twist tie it.
I put the whole works of it in a 14 cup Rubbermaid container…
Coat hook on porch wall. Keeps four probes fairly well.
I have one, but I never got to a point to asked for help. If it ever makes it on to my todo list then I would
1. Wrap the cord around hand, hold
2. Velcro tape band around cord
If it ever moves up the list that’s what I do.
Hang them on a hook on the garage
Might fit in a tooth brush travel container?
These work great
Aieve Meat Probe Organizer, 2… https://www.amazon.com/dp/B0C3GTPK7X?ref=ppx_pop_mob_ap_share
These are great, they’re magnetic too so I store them on the side of the refrigerator.
https://www.thermoworks.com/silicone-probe-spool/
You don’t.
I threw that shit out years ago in favor of a wireless probe. [THIS](https://www.amazon.com/dp/B0DZF2ZM19?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_3&th=1) is what I have, and it works great. I plan to upgrade to a [MEATER Pro Duo](https://www.amazon.com/gp/product/B0DNTVC2WD/ref=ox_sc_saved_image_8?smid=A1K8S7R6M3LDFL&psc=1) the next time it goes on discount. The Meater is rated up to 1000°F, so outside of some insane situation, is there any reason not to go that route?