Any input on repairing my handle? Any info appreciated
by Ok_Risk_6477
4 Comments
drippingdrops
The photo is trash so it’s hard to say, but is that not a bolt that just needs to be screwed back in to the handle?
VK56xterraguy
The threads inside the handle are probably stripped. A tap is is needed to rethread it.
Inevitable-Hall2390
Throw some JB Weld in the hole and let it cure for a few days before you try to use it again
Adventurous-Leg8721
If the thread plate came out rethreading probably won’t work. Could try epoxy. Otherwise wise drill through handle and bolt through it with washer and nut inside door
4 Comments
The photo is trash so it’s hard to say, but is that not a bolt that just needs to be screwed back in to the handle?
The threads inside the handle are probably stripped. A tap is is needed to rethread it.
Throw some JB Weld in the hole and let it cure for a few days before you try to use it again
If the thread plate came out rethreading probably won’t work. Could try epoxy. Otherwise wise drill through handle and bolt through it with washer and nut inside door