the rubber padding in my zerno grinder chute has gotten loose, and coffee ground is getting stuck /retained in between. any idea how i can fix this?
i dont think im getting the full zero retention and it gets messy as lots of coffee ground gets all over the grinder.
also you can see that the chute is no longer aligned because of that rubber padding issue.
by sweetsguar
4 Comments
Remove it and glue it again?
Not an expert on this grinder, but I’m struggling, from a purely engineering perspective, to see how this seal could cause such a deflection in the way it is displaying in your image.
Underneath the seal would need to be clogged with grinds for it to cause this, surely.
Is this a magnetic device, in fact, I watched a Lance Hedrick video recently on a review of this verses Mazzer Philos and on his Zerno Z1 it didn’t have a seal, maybe consider removing it, clean any remaindered glue and don’t use it.
https://preview.redd.it/05lx04e12e1g1.jpeg?width=1991&format=pjpg&auto=webp&s=0cbe474176506ee195bbe2b7a0abce7ff901ebb4
I hope that world-leading 1 year american warranty gets you taken care of…
1300 dollar grinder btw, this is unacceptable