Can’t get as far as putting the base together 😅 What am I missing here: The legs are completely unstable, they literally just fall off with the slightest movement (usually when I’m putting on the 4th leg), so have to start all over again.
There’s no actual rivets on the hole in this part of the leg (second pic), so it literally seems like it’s supposed to be a balancing act until the bottom of the base/cart goes on (the actual holes with rivets – 3rd pic).
This can’t be right as it would be a 4 person job to hold each leg in place until the bottom of the cart goes on.
So I must be missing something but the instructions are vague and any videos usually skip over this part (as it’s presumably so easy).
Help?
by Jayjayjaybee
4 Comments
Take the screws out and then the flap where they are now attached hooks over the legs. I built mine a week ago and had the same confusion.
In your second picture – the ring slots over that metal piece in the middle of the leg in the second picture. Then you screw into the whole thing
I screwed each one leg and both bases by hand first for the wiggle room. Once all legs and both bases were held together i tightened with the included Allen key. It was pretty easy, just wish I pulled out my ratchet to make it easier but I went with the included tools
Gd you’re dumb